Yeolpise Hand Sewn Steering Wheel Cover
Non-Slip Breathable Microfiber Leather Steering Wheel Cover wrap Car Interior Accessories,make every detail of the steering wheel be perfectly wrapped, just like the original factory.

Features:
1. Perfectly fit the OEM steering wheel,make every detail of the steering wheel be perfectly wrapped.
2. Made of high-quality microfiber leather, non-slip, breathable and comfortable grip. Give your old steering wheel a new look.
3. Hand Sewing,It takes about 2-3 hours to sew by hand. There is no need to remove the steering wheel, stitching is done directly on the original steering wheel.

Applicable Models:
Replacement for Chevy Astro Silverado 1999/Suburban 2000/Blazer S-10 2001/Avalanche Blazer 2002/Kodiak 2005,Also Replacement for Cadillac Escalade 2000 2002

Operation Steps:

1. Put on the steering wheel cover. Make sure the location is correct. In order to ensure that the stitching at the back is not crooked, the position where the leather meets is exactly at the center seam on the original steering wheel.
2. Affix double-sided tape to fix it. You can stick double-sided tape on the stitching on the inside of the leather. Be careful not to stick the double-sided tape on the edge, otherwise the edge may not fit into the gap.
3. Plug the edge. After positioning and sticking the double-sided tape, use the edge plug device to plug the exposed edge into the gap of the steering wheel, and pay attention to use different angles to plug the edge.
4. Hand stitching. Select a line that is 3-4 times the length of the sewing area, and then you can choose a starting point to stitch.

Note: For the specific operation process, please refer to the video.