our silicone mold help you to make pretty phone holder, car decoration, home ornaments, desk display,cakes, jelly, chocolate, ice cubes, sugar etc. Finish: gloss (may require polishglaze if need a shiniestmost glossy look Suffer temperature: 40 to 220 centigrade 40 to 428 fahrenheit Can be used with dishwasherovenrefrigerator Food grade, no BPAPVCphthalate Food and Non Food material should use separately. Wash and boil before use, especially for food More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80 DegreeC, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water base ink for resin casting. 5) After baking clay resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while soak in hot water a while release with baby oil if it is hard to release. Package Included: 1 x Bear Resin Mold 1 x Unicorn Casting Mold 1 x cat silicone mold Notes: Clean: Normally,the dust can be washed with clean water. If there is glue residue that cannot be dried,recommended to clean with soap water. Storage: Please put resin molds away from dust and sunning. Demold: You can add a drop of soap in clear water to make it easier to push out. work it down to the mold, then push the project from the bottom. The resin molds should avoid high temperature baking and sharp objects' scraping, as well as oil stains and strong corrosion chemicals.