Model E, Type EP5 120V, 60Hz 41W.
fittings ø 1/8"- ø 6 mm;
pressure max 15 bar;
water temperature max 25°C;
integrated diode (1N 4007P);
lead connector 6.3x0.8 mm;
All pumps are designed and tested using water as fluid.
Pump should have water inside after removing red cap off of water inlet.
A brown stain may be visible around the water inlet, it is normal.
We do not recommend to stock the pumps for long time,
especially in high temperature storage house and in particular
for pumps without water inside.
Sometimes pumps will develop an airpocket in shipping or from storage.
TO WORK PROPERLY, PUMP MUST HAVE WATER INSIDE .
EMPTY PUMP WILL MAKE A LOUD BUZZING NOISE.
To remove the airpocket, use a syringe filled with water and push
the water through the pump. Make sure the other end is clear and drained,
or connected within machine and air can escape the other side.
The thread connection G 1/8“ of the plastic pump outlet is not subject
to the norm UNI ISO 228/2. The seal is not guaranteed by the thread.
In fact the hydraulic seal has to be assured
by the seal OR 2025 Ø 1.76 x 6.07 mm.
Replacement Pump for Espresso Machine with Part#
ASTORIA MCM 26315
ASCASO V..658, BEZZERA 7731011, 7731019
BRASILIA 17572.4.00.08 , 00607.4.00.08
CARIMALI 95.00835.00.17
CASADIO 533194820
CIMBALI 533-194-820
ELEKTRA 255035
EXPOBAR 60000047
FAEMA 533194820
FIORENZATO C.S. A1900044
GAGIA 187720955
GRIMAC MG072, 1220300006
LA PICCOLA C07-EFX5/110
NUOVA RICAMBI 617160/11
NUOVA SIMONELLI 4800006
QUICK MILL PO08700V1
RDL 14200030
RANCILIO 34011023
RICAMBI GARDOSI V082
SAECCO 187720955, 9070.026.00F
SCALA C-0584
SPAZIALE 07639
SPINEL SR.000.054.004
VIBIEMME POMPV.