400 Breadboard:
With self-adhesive tape on the back, make it easy to stick on Prototype Shield.
82 x 53 x 9m in size with a standard double strip in the middle and two power rails on both sides.
You can pull the power rails off easily to make the breadboard as thin as 3.5cm and stick it onto an protoshield.
You can also cut these in half with a saw to create 2 tiny breadboards, or "snap" these breadboards together either way to make longer or wider breadboards.

MB102 Power Supply Module:
Apply to MB102 breadboard
Input voltage: 6.5-12 V (DC) or USB power supply
Output voltage: 3.3V/5V can switch over
Maximum output current: Fluctuation two road independent control, can switch over to 0 V, 3.3 V, 5V
On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use

Alligator Clip to Jumper Wire:
In 1 kit, 5 unit alligator clip to dupont cable male, 5 unit alligator clip to jumper wires female. After you tear apart into individual cable, in total 10 unit single roots
. Very convenient for Arduino/breadboard prototyping / Raspberry pi/ Orange pi/ Makey Makey project or other DIY connection, Maker experiment, engineers LAB testing.

Color: Different from picture, shipped in random.
Material: high-grade pure copper core insde.
Each cable length: 20cm / 8-inch.
Including one 5-pin alligator clip to jumper wires male, one 5-pin alligator clip to jumper wires female.
The male ends meant for insertion into standard 0.1 quot(2.54mm) female sockets and the female ends for insertion into standard 0.1 quot(2.54mm) male headers.

Package Incuded:
1 x 400 breadboard
1 x power supply module
1 x 20cm alligator clip to jumper wires male 5p
1 x 20cm alligator clip to jumper wires female 5p