Features:
1. It is a bypass module to release the chip key, universal and safe design, it has stable performance.
2. Bypass immobilizer chip on OEM key or fob to support remote start, car alarm, engine on/off button and key duplication.
3. This module only compatible with most chip key cars. It does not apply to other immobilizers.
4. Simple two‑wire connection, easy and fast to install, no need of complicated operations.
5. If your key is larger than the box of this unit, please take out the entire chip or PCB from the box.

Specification:
Item Type: Immobilizer Bypass Module
Material: ABS
Power Supply Voltage: 12 (V)
Working Temperature: -20-80 (℃)
Application: Suitable for 12V cars

How to Use:
1) Remove the key screws of bypass module control box, open the control box;
2) Insert the OEM car key or key PCB or Key chip under the wire;
3) Lock the locker and press the wires close to the remote key, or key PCB or Key chip;
4) Tighten the screws and lock the case;
5) Circles the sensing the wire on the OEM car key socket(circle more circles can enhance the signal;
6) Fasten the sensing wires to the car key socket with glue;
7) Try to start car engine to confirm the bypass module working, if it is not working, please try circle sensing wire more circles on the car key socket, or check the connection if it is right;
8) Place the bypass module in a hidden place.

Package List:
1 x Control Box
1 Bundle of Cable
1 x Induction Coil
1 x Adhesive Stickers
1 x Manual

Note:
1. It is a bypass module to release the chip key. Please note that it is not a remote start button.
2. A replacement chip key is required to put in the box; If the key is bigger than the box, you need to take out the key PCB to the box.
3. The steering wheel lock needs to be released if your car has it.
4.Please note that the new type and old type of this