Dear Customer,
Please read the following notice before purchasing:

This item plug and play remote starter with PKE only fit for gas engine Jeep Wrangler 2010-2018 year with standard key start only.
Please make sure you have the right vehicle as list here when buying.
Note:
1. when buying, please check above the product description page carefully to see if which is the right item you plan to buy.
2. The bypass module is included in the kit.
3. You need to unlock/remove the steering wheel lock when do the installation.
Main feature:
1. Plug & play, no damage to the original car circuit，CAN BUS compatible.
2. Plug & play with OBD2 connector & T-harness, no damage to the original car circuit
3. Although the device is plug & play, we recommend you install it by a trained alarm installer or professional alarm installer to install it if you have no alarm installation experience.
Main feature:
1. Upgrade key start to Push button start/stop
PKE-passive keyless entry
Manual arm/lock & disarm/unlock
Mute/audible alarm
Remote trunk release
Panic mode
Valet mode on/off setting
Remote engine start/stop
Central door locking automation
Touch password entry to lock or unlock the car
Password revise & reset
Programming method( pre-programmed before shipping, no need to re-program them again).