The shaft coupler connector is mainly used to connect the shaft of the motor and the Fully Threaded Rod to ensure the normal operation of the machine. Mainly used for 3D printers, DIY model cars, model boats, model Airplane
The rigid Coupling, we provide here, are in the size of: Material: Stainless Steel; Color: Silver; Screws Size: M5*0.8; Bore size: 8mm to 12mm/0.31inch to 0.47inch; Total Size: 22mm x 20mm/0.87inch x 0.79inch(L*D)
Shaft Coupler made of brass material, durable, corrosion-resistant, and does not rust, can be used for a long time
Top tight type rigid coupling, high torque with rigidity, low inertia, and excellent sensitivity.No rotation gap and elastic action can make up for symmetrical angular misalignment.
Select the appropriate size according to the motor shaft, remove the old shaft connector from the motor shaft, and then install the new motor shaft connector on the motor shaft.
-42%
Climax Metals ISCC-062-050 Black Oxide Plated Mild Steel Clamping Coupling, 5/8" x 1/2" Bore, 1-5/16" Outside Diameter, 2" Length, #10-32 x 1/2" Clamp Screw
KWD 14
-29%
uxcell 6mm Inner Dia H12*D10 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2 PCS for DIY Parts
KWD 2.500
Bonsicoky 4 Pcs 6mm Rigid Flange Coupling, High Hardness Metal Axis Bearing Fittings Motor Connector, Guide Shaft Support Coupler for DIY RC Model
KWD 3.500
Coupling Sleeve Elastomer 7JE For S-Flex Sure Flex Gear Sleeve Solid Design, 4.34" OD, 2.19" Elastomer Length, 725 in-lbs Nominal Torque
KWD 11.500
