Unfinished heat transfer key fob sublimation blank making kit with key rings and rivets, easy installation. You can sublimate beautiful unique patterns on the glitter sublimation key fob blanks, great for craft lovers.

What You Will Get?
30 pcs sublimation key fob blanks(1.5*3.2inch/3.9*8.2cm)
30 pairs of rivets(6*6mm)
30 pcs key rings(1.2inch/32mm)
1 tutorial

Features
Easy to make, suitable for sublimation, best effect.
Made of high-quality PU & PET.
Full set contains sublimation blanks and rivets, key rings.

How to Make It?
1. Print patterns you sublimate by thermal transfer printers.
2. Place the sublimation transfer paper onto a sublimation keychain blank, the image should toward the glitter sublimation keychain blank.
3. Turn on the heat press, adjust the temperature to about 200 ℃, preheat for 5 seconds, then cover the heat press on the blank for sublimation, heat pressing for 40 seconds.
4. Remove the paper gently, check the sublimation affection.
5. Install the rivet: insert the rivets into the holes and secure them with a hammer.
6. Install the keyring.
7. A unique keychain is finished.

⚡ Notes
1.Only the side of glitter can be sublimated.
2.Pay attention to the heat press machine during the sublimation process to avoid high-temperature burns.
3.Due to the difference of heat press machines, the time and temperature will be different, please adjust according to the actual situation.
4.If you feel a little odor, don`t worry, air them out for 1-2 days.
5.Manual measurement, please allow slight errors on size and weight.