Specification:
100% brand new and high-quality drive belt.
Color: black.
Warranty: yes.
Material: rubber.
Used on Yerf Dog and Hammerhead go-karts and dune buggies.
Package includes: 2 x drive belts.

Compatible with:
Replaces Comet 203590 203590A 203590B 203590C.
For Comet 30 Series torque converters 3hp to 8hp engines TAV2 Go Kart clutches.
For Manco: 9655 9659.
For Murray: 12-13053.
For Heald: 203-026.
For Rotary: 13053.

Size:
Width: 0.75 inch / 19mm(approx).
Length: 29.28 inch / 744mm(approx).
Angles are different on each side of belt, one side of the belt is almost flat measuring 2 1/2” degrees and 18 degrees on other side.
Pulley needs to be from 7 9/16 inch to 7 5/8 inch(6” Driven), or from 6 13/16 to 6 7/8 inch(7” Driven) (measured from the center of the clutch to the center of the driven pulley).
Please be carefully check the goods appearance, size, shape before ordering.

How to Select the correct belt?
1. Determine the series type.
2. Measure the ”Outer Diameter” (O.D.) of the driven pulley on the jackshaft.
3. Measure the ”Center Distance” (C.D.), which is the exact distance between the center of the engine crankshaft and the center of the jackshaft, must be precise.
4. Use the two measurements, the driven pulley outer diameter and center distance measurement to determine the correct belt part number from the relevant chart below.

Note:​
Should your machine's center distance fall between the center distance (C.D.) settings listed here, select from the two belts the one with the larger outside circumference (O.C.) for best wear and to avoid machine ”creep” during idling.