The upgraded fireplace remote on/off kit emits a "beep" sound upon successful connection.

The improved replaces wall switch is easier to install and remove, the button can precisely control the fireplace on/off.

The 18-inch piggyback connectors have both male and female terminals, the black heat shrink tube ensures the connectors will not touch each other or other exposed metal surfaces, it can adapt to more millivolt solenoid valves.

The receiver's battery compartment uses a sliding Battery cover, more convenient to replace the battery.

LEARNING TRANSMITTER TO RECEIVER
①The transmitter privacy (DIP) Switches are preset at the factory. Setting the 4 bits DIP Switches on transmitter to select a security code.
②Put the receiver slide switch to “REMOTE” location. Using a small screwdriver or end of a paper clip gently press and hold the ‘LEARN ‘button on the receiver to accept the transmitter security code upon initial use, when you release the LEARN button the receiver will emit an audible 3 “beep” sounds.
③After the receiver emits 3 “beep” sounds. Press the transmitter “ON “or “OFF” button and release at once. The receiver will emit several beeps indicating that the transmitter's code has been accepted into the receiver.
④If you are unsuccessful in matching the security code on the first attempt repeat step 1-3

IMPORTANT SAFETY INFORMATION:
Turn appliance OFF (at the appliance or remote receiver) if you are away from your house for a long period of time.
This remote-control system is designed for use with a millivolt or 24V gas valve system. Do not use this remote-control system on applications with voltages above 24 Volts AC/DC and 1 amp current.
The remote receiver should be kept away from temperatures exceeding 130º F.