Use kintsukuroi glue:
open the lid and squeeze out to mix directly, apply the mixture to the joints, and cover the lid after use.

DIRECTIONS:
1. The surface to be repaired must be clean, dry, and free of oil, grease, and wax. For best results, roughen the repair surface with sandpaper before applying epoxy adhesive.
2. Remove the cap from the syringe. Push the plunger to dispense equal amounts of resin and hardener on a clean surface.
3. After squeezing out the glue, wipe the glue outlet clean and close the lid as soon as possible. Cover the cap to the syringe for next use.
4. Mix thoroughly with gold powder until evenly colored.
5. Sets in 5 mins and cures in 1 hour. Apply the mixture evenly to the target area within 5 mins. Epoxy will reach full strength in 1 hour at 77°F.

PACKAGE CONTAINS: 1*50 ml kintsugi glue.

WARM NOTICE:
- Contains Epoxy and polyamine resins. Avoid contact with eyes and skin. If the skin is affected, wash thoroughly with water. If eyes are affected, flush with water for 15 minutes.
- Harmful if swallowed. If ingested, do not induce vomiting and seek medical attention immediately.
- KEEP OUT OF REACH OF CHILDREN.