1. The wire thread insert is a female thread fastener with a certain elasticity, which can improve the connection strength of the thread.
2. 304 stainless steel has good corrosion resistance and is not easy to break when repairing threaded holes.
3. Insert the wire screw set into the screw hole of the metal workpiece to form a wear-resistant and high-precision standard female thread.
4. The wire thread insert makes it easy and quick to switch between metric and imperial threaded holes.
5. These repair nuts are mainly used in manufacturing fields such as aviation, automobile, lamp, mold and mechanical equipment. Specification: Item Type: Wire Thread Insert Material: SUS304 Model: US Units 10-24x1.5D Diameter: Approx. 4.826mm / 0.2in Pitch: Approx. 1.06mm / 0.04in Length after installation: Approx. 7.2 mm / 0.3 inch Number of turns before installation: 5.4 Outer diameter before installation: approx. 6.1 - 6.6 mm / 0.24 - 0.26 inch />Drill Diameter: Approx. 5.1 mm / 0.2 inch
Thread Protection Socket Model Specification Description: For example: M3 x 0.5 x 1.5 D means that after completing the screw set, the female thread is M3, the pitch 0.5 and the length 1.5 is D (length refers to 1.5 times the diameter, so 1.5 x 3 = 4.5mm), the length here refers to the length after installation , and peel off the protective film from the part where the wire needs to be connected.
Step 2: Unscrew the terminal block and prepare the stripped wire.
Step 3: Insert an end of the stripped wire into the terminal and then tighten the screw.

Package List:
50 x Wire Thread Insert