Size - 1/8 inch shank and 1/8 inch cutting diameter, 3/8 inch cutting Length, 1-1/2 inch for total length.
Material- Solid Carbide with TiAlN Coated. Type: 2 Flute with squre end.
We use the highest quality tungsten carbide powders and adjust the ratio of tungsten carbide and cobalt to meet the ideal hardness. It is stable and has excellent wear-resistance of the material. It significantly enhances the tool's lifespan and keeps the end mill sharp. It also helps keep the surface quality of your work-piece at the best level possible.
General Usage: Applicable with copper, copper alloys, cast iron, steels, carbon steels, alloy steels, pre-hardened steels, hardened steels, and stainless steel materials. Best use for materials HRC less than 50.
LU&MN End mill bits are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
ACTOOL 1-5/8" Diameter × 2" Depth of Cut HSS ANNULAR CUTTER with 3/4'' Weldon Shank
KWD 23
-9%
Wright Tool 9M41280 Die Separating Bar, 18"
KWD 10.500
DIE METRIC 10MM-1.25MM
KWD 4
MaxTool 1/4"-18 NPT Tap (National Pipe Taper Tap) 18 TPI; Quality High Speed Steel HSS M2; Fully Ground; NP02W00R016
KWD 8
