Search

Search

Zooz 700 Series Z-Wave Long Range Smart Relay ZEN51 | Installs Behind Wall Switch Or at The Light | Compatible with SmartThings, Hubitat, and Home Assistant | Z-Wave Hub Required (Sold Separately)

KWD 14
Brand
ZOOZ
StyleZEN51 Single Relay
– 1 +

Special Features

  • SMART DC MOTOR CONTROL: Install this Z-Wave module behind your existing wall switch for motorized blinds or awnings. Program automated open / close actions and schedules around your daily routine. Check hub compatibility first, this is an advanced device supported by selected hubs only (scroll down for details).
  • 2 MODES: Use this DC motor controller in shutter (up-down) or Venetian mode for your shades and blinds.
  • LATEST Z-WAVE TECH: Based on the fast and reliable 700 series Z-Wave chip, this device is also Long Range ready. If you have a Z-Wave Long Range capable hub and software, you can take advantage of the direct hub-to-device communication with extended signal coverage.
  • SIMPLE INSTALLATION: Use the controller's pigtails to wire it between your wall switch and the DC motor you'd like to control. Enjoy detailed tutorials and access to custom wiring diagrams through the Zooz support portal, open 7 days a week.
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with the Z-Box Hub (recommended for Zooz devices), Hubitat with custom driver, Home Assistant (Z-Wave JS), and it's compatible with SmartThings through a custom edge driver (available through the Zooz support portal). This product is backed by a lifetime US based support from Zooz and a 5-year warranty once registered.

Description

DC MOTORS ONLY: Use with small DC motors up to 1.5 A only. Do NOT use with 120 VAC motors!

SPECIFICATIONS:Model Number: ZEN53
Z-Wave Signal Frequency: 908.42 MHz
Power: 6-32 VDC
Z-Wave Range: Up to 300 feet line of sight
Dimensions: 1.5" tall, 1.4" wide, 0.7" deep
Operating Temperature: 32-104° F (0-40° C)
Installation and Use: Indoor only

Will it work with my smart speaker
Smart speakers are not Z-Wave controllers so you will need a compatible Z-Wave hub to control this device with voice commands.
Smart speaker compatible Z-Wave hubs include:
Z-Box Hub
compatible with SmartThings with a custom edge driver
Home Assistant (Z-Wave JS)
Hubitat

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}