Specifications:
Material: ‎woven pile fabric
Size: 9x5mm(11/32 x 3/15 inch)
Total length: 10m(32.8ft)
Color:Gray

Package Includes: brush weather stripping x 1

Installation Steps:
1. Measure the gap of window;
2. Clean the surface where you intent to install the tape, keep it dry, clean and smooth;
3. Decide the length of tape based on the window side and cut it to your need;
4. Teer off one end of the tape;
5. Stick the tape to the window gap and press it firmly as you stick it;
6. Teer off the tape progressively as you stick it;
7. Make double check and press the tape firmly. After 24 hours, the tape could form a solid bond.

Friendly Tips:
- Please keep the surface clean and dry when you stick, any dirty, uneven, humid or painted surface may influence the performance of the product.
- Please DO NOT pull the tape within 24 hours after installed.
Press the tape after installed will get a better effect.
-Before installation, wipe the surface of the object with alcohol, which will make the bonding effect of the adhesive pile weather strip better.
- Installation is best when the temperature is between 10 degrees Celsius and 35 degrees Celsius. Too cold weather is not suitable for installation. Better to heat the adhesive 2 minutes by Hair Dryer before install.
- Not suitable to use it on oily surfaces, corrosive surfaces, easy-to-peel surfaces, rough dusty surfaces, and rain-soaked surfaces.