3D Printer Platform 257x257mm Dual Side Textured PEI Steel Sheet for Bambulab X1 X1C P1P P1S A1: Strong Adhesion Easy Prints Release Removable and Flexible Spring Build Plate BCZAMD

1. Only applicable to: Bambulab X1 X1C P1P P1S A1, not for A1 mini.
2. Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
3. Very easy to take prints: when the hot bed temperature drops to room temperature, just gently pick it up and remove it. If the filament is sticky, you need to bend the steel plate to remove the prints.
4. Compatible with a variety of filaments: PLA, PLA+, PETG, ABS, etc. You just need to set the temperature according to the temperature required by the filament, for example, PLA is 215 degrees Celsius for the nozzle and 30-50 degrees Celsius for the heat bed, while PETG is 250 degrees Celsius for the nozzle and 60-80 degrees Celsius for the heat bed. If you have tested the most suitable temperature, we would love to hear from you professionally.
5. We not only have double-sided PEI steel plate, but also sell PEY+PEI PEO+PEI, if you need, please feel free to contact us!

Hello,