Installation Tips: 000008660 Please pay attention to waterproofing when installing ice thickness control. When the plug is connected to the control board, if waterproof measures are not taken, water entering the control board will damage the control board and cause a short circuit.
High-Quality Materials: Made of upgraded materials, more durable and greatly extended service life.
Highlighted Features: The 000008660 Ice Thickness Controller will sense the thickness of the ice bridge forming on the evaporator. Once sufficient thickness is reached, this section will tell the board to start harvesting. Figure 6 shows most compatible models, if you don't have an ice maker model you can contact us to make sure it is compatible.
Problems Solved: The ice machine is slow to freeze, the ice is too thick or too thin, or thick ice cannot be released in time, etc.
You Will Get: 1* Ice Thickness Probe Assembly, if you have any problems during installation or use, please contact us in time.
Alto-Shaam GS-37060 Model 20-20 CTP Sweep Door Gasket, Gen-3, 13" Height, 11" Width, 7" Length
KWD 50.500
True 800605 T-49F/T72F Condenser Coil
KWD 130.500
-6%
True 968087 1.25 lb. Pull Reel Retriever
KWD 24
Turbo Air KR81410300 Display PCB
KWD 43
