The RX-M9/M0303M/M0404M are three simple distributed flexible pressure sensors. The M9 is a 1-line*9-column mode with a total of 9 sensing points. The M0303M is a 3-row*3 column mode with a total of 9 sensing points. ; M0404M is a mode of 4 rows * 4 columns, a total of 16 sensing points.
Product size and structure Single point range: 1-50kg
Sensor thickness: Terminal extension length: 5mm
Outlet center distance: 2.54mm
Terminal Type: Male/Female Pin
Product performance parameters
Static resistance: >1MΩ
Hysteresis: Drift: Sensor repeatability: ±10%
Working voltage: 3.3-5V
Working temperature: -50-+50 °C
Working humidity: 0-95%
Response time: Numerical stability time: Electromagnetic interference: 0
Electrostatic discharge: 0
Service life: >500,000 times
Applicable fields
·Simple pressure distribution test;
· Product design and evaluation - interface stress testing and evaluation;
·Industrial testing - plane flatness detection;
·Creative design - object placement detection; · intelligent switch;
· Object pressure position judgment.
Instructions for use
a) The sensor area should be flat to fit the test surface;
b) Avoid sharp objects acting on the sensing area;
c) The sensor has a temperature drift phenomenon to avoid use above 60 °C;
d) For best results, it is recommended to apply a soft pad slightly smaller than the sensing area in the sensing area.
Purchase instructions
◆This is a sample of strip distributed sensor. If there are special requirements, it can be customized according to the requirements. The range is set according to the best test interval. As long as the sensor is not damaged, the over-range will not damage the sensor test performance, it will only affect the test. Resolution.