Search

Search

2PCS ESP32 ESP32-S3 Development Board Type-C WiFi+Bluetooth Internet of Things Dual Type-C Core Board ESP32-S3-DevKit N16R8 Development Board ESP32-S3 Module

KWD 7
Brand
DORHEA
Weight
41 g
Size2pcs N16R8
Capacity2pcs N16R8
All electronics ship with US style plugs. You may need a voltage converter or a plug adapter.
– 1 +

Special Features

  • ESP32-S3-DevKitC-1-N16R8 Flash: 16MB QD; PSRAM: 8MB QD; SPI Voltage: 3.3V
  • Most of the I/O pins on the module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-S3-DevKitC on a breadboard.
  • The ESP32-S3-DevKitC development board equipped with ESP32-S3-DevKitC-1-N16R8, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions.
  • ESP32-S3-WROOM-1-N16R8 cable can be used: USB Type A to Type-C cable or CC cable Note the distinction between the commonly used USB A port to Type-C cable that can only be charged, which cannot be used for communication between YD-ESP32-S3 and the host.
  • USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)

Description

There are three mutually exclusive ways to provide power to the board:
USB-to-UART Port and ESP32-S3 USB Port (either one or both), default power supply (recommended)
5V and G (GND) pins
3V3 and G (GND) pins

Hardware Setup:
Connect the board with the computer using USB-to-UART Port or ESP32-S3 USB Port. In subsequent steps, USB-to-UART Port will be used by default

Software Setup:
Please proceed to Get Started, where Section Installation will quickly help you set up the development environment and then flash an application example onto your board

Package include:
3 x ESP32-S3-DevKit C N16R8 development board

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}