Product name: 6-port SATA3.0 expansion card.

Product chip: ASMedia ASM1166.

Product interface: PCI-E 1X (We recommend using with PCIE 3.0, which is faster).

Support system: WIN10 / WIN8/ Linux/ Synology/ Ubuntu.

Conforms to Serial ATA 3.0 specifications and backward compatible with SATA2.0 SATA1.0.

Complies with PCI-Express v2.0 specifications and backward compatible with PCI -Express v1.0.
Supports communication speeds of 6.0 Gbit/s, 3.0 Gbit/s and 1.5 Gbit/s

Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i.

Supports AHCI1.0 mode and IDE mode.

Supports 4 storage modes: RAID1, AHCI, SPAN, RAID0.

Native command queue (NCQ) support.

Supports FIS based on multiplier switch port or command switch.

Supports hot hot swap. Compatible with SATA6G, 3G and 1.5G hard drives.
System requirements: one PCI Express 1x slot is available that supports 1x / 4x / 8x / 16x.
Speed description information:

1. The best effect can be achieved with SATA3.0.2 data cable. BOIS motherboard setting: the SATA mode should be changed to AHCI.

2. Although some motherboards are PCIE version 2.0, by default BOIS does not enable gen2 high-speed mode, which must be enabled manually. The maximum speed of PCI-E 2.0 is 380-450 m/s. When connected to PCI-E1.0, the speed is only 200-300 m/s. Different computer configurations and SATA SSDs have different speeds.

3. SATA ports slow down when used simultaneously. This is not for users looking for speed. They are only used for expansion hard drive interfaces.
Packing list:

1 x PCIe X1 to 6 SATA 3.0 card 6 x SATA cables.

1 x low-profile bracket.