JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/4 inch Fittings, Can Tap, Quick Coupler
AC U Charge Hose: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 23 inch, one side with R134a can tap, the other side with a brass 1/4 inch female fittings, which is used for R134A quick coupler directly.
Refrigerant Charging Gauge: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4 inch big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the automotive air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge.
Brass Quick Coupler: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with standard R134A low pressure side suction service port. Aim at R134A suction service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect.
Can Tap: Brass can tap with 1/2 inch female thread interface, can screw to fix on 1/2 inch male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. Do not use the can tap as R134A cap, refrigerant is corrosive, if use this can tap as R134A cap for a long time, the inner rubber sealing ring will be corroded, then you will find it leaks
Measure Pressure and Recharge R134A: Start the car, open AC to MAX. Clockwise twist T handle to close can tap, connect the quick coupler and car AC suction service port to measure the pressure. The reading is right only when AC compressor is working. If need to charge the refrigerant, please compare to the manufacturer's recommended readings, choose the appropriate amount refrigerant can, to ensure there is no leftover in the can.
Simple R134A Charging Tool: This air conditioning U hose gauge is very simple, only 23 inch long and equipped with a non-detachable gauge can tap. Also it is very easy to operate dynamic pressure measurement and refrigerant charging from auto low pressure suction service port.
JIFETOR AC Flush Kit, Car Air Conditioner System Clean Canister Flushing Gun Tool Set, for Auto HVAC Pipe Line Cleaning, with 220PSI Gauge, Air Fittings and Hose
KWD 14
14PCS Radiator Pressure Tester Tool Kit with Aluminium Pump and Metal Adapters, Black
KWD 19.500
Compression Tester Kit, Engine Cylinder Test Tool 8PCS Set with Pressure Gauge Adapters, Testing Small Gas Petrol Engine on Automotive Motorcycle Auto Outboard Snowmobile ATV Aircraft Chainsaw
KWD 7
-6%
Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV
KWD 8.500
