1✅ OEM# W702413-S450B
T30 Torx Pan Head Tapping Screws
Black Finish, M5-2.2 x20mm, Washer Diameter: 20mm

2✅ OEM# W700505-S300
Light Green Nylon Cowl Trim Bumper Fender Engine Under body Cover Screw Grommet.
Screw Size: M4.8
Head Diameter: 20mm, Stem Length: 10mm, Fits into 10mm x 8.5mm Slot

3✅ OEM# W715835-S300
Under Cover U nuts Metal

4✅ OEM# W714972-S300
White Nylon Quarter Panel & Exterior Trim Moulding Clip
Width from Ear to Ear: 8mm, Overall Height: 15mm

5✅ OEM# N811169S,W705550-S300
White Nylon Park & Turn Signal Housing Grommet
Stud Size: 7/32”
Head Diameter: 13mm
Stem Length: 9mm
Fits into 11mm Hole

6✅ OEM# W705436-S300
Black Nylon Wheel Opening Moulding Push-Type Retainer
Head Diameter: 19/32” (15mm)
Stem Length: 3/4” (19mm)
Fits into 1/4” (6mm) Hole

7✅ OEM#388577S W705589-S
Black Nylon Radiator Yoke, Fender & Bumper Shield Retainer
Head Diameter: 11/16",
Stem Diameter: 5/16",
Stem Length: 13/16"
Fits into 6.4mm (1/4") Hole

8✅ OEM# 390018-S W706676-S300
Black Nylon Shield Panel Retainer
Top Head Diameter: 11/16"
Stem Diameter: 5/16"
Stem Length: 1-1/16"

9✅ OEM# W710312-S300
Black Nylon Cowl Vent Retainer
Top Head Diameter: 18mm,
Stem Diameter: 8.5mm,
Stem Length: 32mm

10✅ OEM# W714040-S300
Black Nylon Air Inlet Grille, Bumper Fascia & Front Brake Caliper
Cooling Duct Push-Type Retainer
Head Diameter: 18mm
Stem Length: 20mm
Panel Range: 4.5mm - 7.0mm
Fits into 6.5mm Hole

11✅ OEM# W716510-S300
Black Nylon Lower Radiator Shield
Push-Type Retainer
Head Diameter: 18mm
Stem Length: 12mm
Fits into 7mm Hole

12✅ OEM# N801925S
Black Nylon Door Trim Panel Retainer Clip
Top Head Diameter: 1/2",
Bottom Head Diameter: 25/32",
Stem Diameter: 5/16",
Stem Length: 3/4"

13✅ OEM# W712196-S300
Black Nylon Cowl Vent & Fender Push-Type Retainer
Head Diameter: 20mm
Stem Length: 22mm
Panel Range: 4.5mm - 7.0mm
Fits into 8.5mm Hole

14✅ OEM# W715201-S300
White Nylon Rocker Panel Moulding Clip with Sealer
Top Head Size: 12mm x 20mm
Bottom Head Size: 15mm x 20mm
Stem Length: 15mm

15✅ OEM# W708771-S300
Black Nylon Radiator Shroud Air Deflector Retainer
Head Diameter: 20mm,
Stem Diameter: 13mm,
Stem Length: 16mm.

16✅ OEM# W713297-S300
White Nylon Door & Trunk Trim Panel Retainer with Sealer
Top Head Diameter: 16mm,
Middle Head Diameter: 16mm,
Bottom Head Diameter: 22mm,
Stem Diameter: 11mm,
Stem Length: 17mm,
Fits into 9mm Hole

17✅ OEM# W705002-S300
Black Nylon Hood Insulation Retainer Clip
Bottom Hd. Diameter 1-1/4",
Stem Diameter 5/16",
Stem Length 11/16"