The BeeProLogic is an Easy To Use
Beginners CPLD Development Board. The BeeProLogic is a CPLD development board that is designed to be
user friendly and a great introduction into digital design for Electrical
Engineering students and hobbyists. This board provides a simplified method
for debugging programmable logic code. It has been designed with plenty of
LEDs and Pushbuttons to allow a large amount of interaction between user and
hardware operations.
Hardware Features:
MAX V 5M240ZT100 CPLD From Intel/ 240 Logic Elements 8 Mbit Flash Chip 8 bit Single Channel DAC 5 Inputs/Outputs available at 8x1 connector on board 11 Green User configurable LEDs 8 User Configurable Pushbutton Switch Power: Standard USB (+5V @ 2Amp) Using Micro-B connector 10MHz Oscillator Standard Programming Connector fits any JTAG Blaster Simplified Development Board The BeeProLogic DVD provides detailed step by step instructions to quickly
guide the user to create a project, synthesize the project and download the
programming file into the CPLD. The Quartus Prime Software must be downloaded
from Intels website. Once the Quartus software is on your desktop, the guide
will show you how to create a project, write you first LED blinky code, compile
and program the CPLD.
Programming the BeeProLogic Board The CPLD on the BeePro can be programmed with the code created by the user.
Programming is quick and easy. The BeeProLogic Does Not Include An OnBoard
programmer. The user must purchase a separate JTAG Blaster. To program the board,
a standard USB Micro-B cable must be connected from power (USB Port on laptop)
to the board. Then connect the JTAG Blaster to a USB Port on a laptop. Use the
provided adapter to connect the JTAG Blaster 10 pin connector to the 6 pin.