Body: Brass
Diaphragm: NBR (fiber-reinforced)
Insert: Stainless steel (plunger, spring, etc.)
Seal: NBR (aka Buna-N, Perbunan, and nitrile rubber)

★ELECTRICAL -
Coil: Copper wire in resin-molded casing
Voltage: 110-120 VAC
Wattage: 24 Watt
Current: 0.2 Amp

★MECHANICAL -
Flow Rate: Cv = 12
Pipe Size: 1" NPT female (11-1/2 TPI)
Operation Type: 2-way 2-position direct lift diaphragm
Flow Direction: Unidirectional (follow the arrow on valve body)
Operation Mode: Normally open (valve closes when coil is energized)
Media: Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel, low viscosity fluid, etc. (Do NOT use with gasoline)