About this Dryer moisture sensor WP3387223 3387223 W3387223：
If your dryer turns off too early or continues running for a while after the clothes are dry, the moisture sensor might be damaged.
Our Dryer Moisture Sensor Plate Bar Part Numbers W3387223 , replace for Whirl-pool part 3387223, 525385, AH344525, EA344525, PS344525, AP6008273, WP3387223VP. IMPORTANT NOTE: Please check your dryer model number carefully before ordering, Confirm this moisture sensor plate bar fits or not. IMPORTANT, IMPORTANT, IMPORTANT.
This sensor is very accurate, and it can provide reliable measurements of moisture content in laundry.
The moisture sensor monitors the clothing's moisture level and sends a signal to the control board when the clothes are dry.
It is a top quality product that is designed to provide accurate and reliable measurements of moisture content in laundry.
This part WP3387223 3387223 W3387223 is compatible with Dryer Brands Whirl-pool, Ken-more, May-tag, Ken-more Elite, Kitchen-aid, Ama-na Sears, Ing-lis, Cros-ley & Sears.
It is an essential part of any modern dryer, and it is important to choose a sensor that is durable and accurate.
Made from high quality materials and it features a durable design that will last for many years.
Step By Step Install Instructions:
1.As with any repair, be sure to unplug the appliance before beginning.
2.To replace a moisture sensor bar in your dryer, first remove the lint filter.
3.Next, unthread the screws securing the filter housing.
4.Lift out the housing and disconnect the wires from the moisture sensor bars.
5.Use a small flathead screwdriver to help pry out the old sensor bar you're replacing.
6.Install the new moisture sensor bar by sliding it into position on the filter housing and snap it into place.
7.Return the housing to the dryer and connect the wires to the sensor bars.
8.Hold the filter flap down and reposition the housing.
9.Reinstall the mounting screws.
10.Replace the lint filter.
11.Plug the power cord back in and your dryer should be ready for use.

Compatible with Whirl-pool dryer model number:
YOU CAN SEE FIG 3 and FIG 4 confirm fit model
Compatible with Ama-na dryer model number:
NGD5800DW1, NGD7300WW0, NGD7300WW1, NGD7500VM1, NGD7500VW0,NED7500VW0, NED7500VW1, NGD5700BW0, NGD5800DW0, NGD7500VW1, NED5700BW0, NED5800DW0, NED7300WW0, NED7300WW1, NED7500VM0, NED7500VM1

Compatible with Cros-ley dryer model number:
CED7464GW0, CGD7464GW0.

Compatible with Ing-lis dryer model number:
IGD7300WW0, IGD7300WW1, YIED7300WW0, YIED7300WW1, YIED7300WW2.

Compatible with Ken-more dryer model number:
110C87561601, 110C87562601, 110C87566601, 110C87571601, 110C85088400, 11097751800, 11097751801, 11097761800, 11097761801, 11097872601, 11097872602, 11097872603, 11097892601, 11097892602, 110C66012011, 110C66112310, 1109773701, 11097737701, 11097738701, 110C68102310, 110C76112310, 110C79722800, 110C85081400, 110C85087400, 11097738702, 11097739701, 110C67032601, 110C67042801, 110C68012011, 110C85089400, 110C87572601, 110C87576601, 110C92962200, 110C96562500.

Compatible with Kitchen-Aid dryer model number:
KGHS02RMT0, KGHS02RMT1, KGHS02RMT2, KGHS02RWH0, KGHS02RWH1, KEHS01PMT0, KEHS01PMT1, KEHS01PMT2, KEHS01PWH1, KEHS01PWH2, KEHS02RMT0, KEHS02RMT1, KEHS02RWH0, KEHS02RWH1, KGHS01PMT0, KGHS01PMT1, KGHS01PMT2, KGHS01PMT3, KGHS01PWH1, YKEHS01PMT1, YKEHS01PMT2, YKEHS01PWH1, YKEHS01PWH2, YKEHSO2RMT0, KGHS01PWH2, KGHS01PWH3, KGHS02RWH2, YKEHS01PMT0, YKEHSO2RMT1, YKEHSO2RWH1, YKEHSO2RWHO.

Compatible with May-tag dryer model number:
YOU CAN SEE FIG 3 and FIG 4 confirm fit model