How to put it on:
This product is made of PET braided into pipes, with soft feature in extent, so we refer to follow the directions about “pushing” it on the wire.

How to handle the end:
1. Material of PET is easy to cut with scissors.
2. Mention: the tube requires minimum melting to keep from fraying (you can get the end within about an 1/8 of an inch from the flame and the heat is enough to slowly melt the tips together - you simply need to put the end close to the flame BUT NOT TOUCHING IT!).
3. Important: if the ends work with shrink wrap, just don't get too close to your heat source while shrink wrapping.

Application:
This expandable braided sleeving are for ordinary applications in daily, it keeps wire neat and organized.
The cable management is mainly applied to protect cable that easy to be rubbed, such as hifi wire or audio patch cables, vacuum hose, wire of 3D printer, ethernet cable, etc.

Note:
We recommend you don't cut to length until you have it on, once you pull to tighten it up you will get back plenty of surplus for the next project.

Specification:
Recommended Outer Diameter of Cable: 4-8mm
Flat Width: 4mm
Length: 2 Meter / 6.5 Feet
Material: PET (polyethylene terephthalate)
Melt Temp: 230℃±5℃
Working Temp Range: –60℃～+125℃
Color: Black

Package Content:
1 x Cord Protector