Search

Car Electric Aerial Wing Mount Replacement Universal Automatic Antenna Fitting Kit

KWD 22.500

Brand
MACHSWON
Weight
0.8 kg
1 +

Special Features

  • ▶[Scope of application]: car antenna After upgrading to an IC chip, the signal is more stable and has good AM/FM performance. Good waterproof performance, low noise; easy to install. Suitable for all 12V cars.
  • ▶[Connection method]: (three wires) The red wire is connected to the positive pole of the power supply, and the black wire is grounded through the terminal. There are two wiring methods for the green wire: 1. Directly connect the positive pole of the ACC power supply, and the antenna will rise and fall as the ignition switch is turned on and off. 2. In addition, connect the radio control line, so that the antenna can be controlled at any time.
  • ▶[Material]: stainless steel + plastic; current: 0.7±0.2A; working voltage: DC12V; plug: ISO DIN plug, built-in miniature relay, 3C-2V coaxial cable.
  • ▶[Parameter]: Voltage range: DC10-14V; cable length: 1.2m; extension: 750mm; under the fender: 325mm; cable: 75 ohm cable, line length 1.5m, automatic stainless steel mast signal receiving effect is good, noise is less than 50DB .
  • ▶[Note]: The correct connection line must conform to the wiring diagram in order to work normally. Product quality is guaranteed. Every car antenna is strictly reviewed when it leaves the factory. If the connection wire is wrong, the antenna will not work properly.

Description

Specification:

Model: BF-686A

Colour: Black

Capacity: 80±-3PF

Voltage: DC12V

Current: 0.8AMP

Cable length: 1200 mm

Length of development: 750mm (outside the length of the car)

Under the fender: 325mm

Weight: 635g

Material: body stainless steel, steel

Wiring (three) connection method: red line is connected to the positive pole of the power supply, black line is grounded with the ear, and the green line has two connections: one is the direct current positive pole, so the antenna rises and falls with the power supply on and off, and the other is connected. Control line so that the antenna can be controlled at any time.

Stainless steel automatic antenna

Features:

FM radio is good

Low noise and good waterproof

Easy to install

External high quality micro relay, long service life

3C-2V coaxial cable, impedance 75 ohms

Installation angle: 0-30 degrees

Package includes:

1x Antenna kit

10X Antenna cap

2X Mounting screw

2X Copper cap

1X Eight-hole iron piece

1X Drain tube

Related Items


{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}