Product information:

Product name: FEP Release Film
Packge quantity: 6 PCS 290*210*0.15mm FEP Film

Wide Compatibility:

Fit for ELEGOO Saturn 3, Saturn 2, Saturn 8K, Sonic Mighty 8K, Photon M3 Premium 10.1 inch Resin LCD 3d Printers

FEP release film for 3D printer is a casting film of melt extrusion and made of high purity FEP resin (vinyl chloride propylene copolymer). It has good non-viscosity, heat resistance, electrical insulation, mechanical properties, wear resistance, etc.

Seven advantages elaborate craft:

1. High transmittance: exceeds 95%

2. High ductility: 300%of ductility

3. Good flexibility:10,000 bend tests

4. Stable release force: Coating uniformity

5. Heat resistance: Withstand 200℃for a long time

6. Smooth surface: No wrinkles, scratches and bubbles

7. High cleanliness: Production inno-dust workshop

Installation Steps:

Step1 : Remove screws at the bottom of resin vat and take out the broken release film.

Step2 : Then place the release film between two steel rims

Step3 : Finally put the installed steel wheel back into resin vat and tighten screws

To remove fingerprints, wipe FEP film with a lint-free cloth and isopropyl alcohol (IPA).

NOTE： Be sure to remove the plastic protective cover on both sides of each sheet before mounting.