Related Items

---

• GeeekPi Raspberry Pi 4 Isolated PoE HAT Support IEEE 802.3af or 802.3at PoE Standard,with Raspberry Pi Cooling Fan 30x30x7mm for Raspberry Pi 4 Model B / 3B+ 3B Plus KWD 11.500
• FREENOVE Complete Starter Kit for Raspberry Pi 4 B 3 B+ 400, Python C Java Scratch Code, 708-Page Tutorial, 138 Projects, 386 Items, Camera Speaker Sound Sensor (Raspberry Pi NOT Included) KWD 25
• LILYGO T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display TTGO Development Board KWD 6.500
• MakerFocus ESP32 Development Board WiFi Bluetooth Support Integrated 2.4GHz PCB Antenna CP2102 with 0.96" OLED Display for Ar duino NodeMCU Intelligent Scenes KWD 7
• Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H (3421) KWD 4.500
• DEYUE Solderless Prototype Breadboard | 1x830 tie in Point Breadboard 2x400 tie in Points Circuit Boards 6x170 tie Points Mini Modular breadboard Kit KWD 4
• STM32 Nucleo Development Board with STM32F446RE MCU NUCLEO-F446RE KWD 9.500
• ALLECIN Solderless Electronics Breadboard Jumper Wires Kit 400 830 Tie Point Breadboard 14Values Solid Jumper Wire 126pcs U-Shape Male to Male Bread Board Cable Wire Dupont Ribbon Cables for Arduino KWD 6
• Raspberry Pi Zero 2 (Two) with Vilros Adapters & Quickstart E-Book Download Code-Includes USB OTG Adapter, HDMI Adapter, Camera Module Adapter,Pin Header, Heatsink & Vilros Pi Zero Guide Ebook Code KWD 14.500
• HiLetgo BadUsb Beetle Bad USB Microcontroller ATMEGA32U4 Development Board Virtual Keyboard for Arduino Leonardo R3 DC 5V 16MHz KWD 6.500
• Raspberry Pi Zero 2 Case, Raspberry Pi Zero Case Kit with Pi Zero Heatsink, HDMI Adapter, Heatsink for Pi Zero W 2 / W/Pi Zero 1.3 / Pi Zero WH (Black) KWD 4
• Seeed Studio CAN-Bus Shield V2 Compatible with Arduino for Controller and Transceiver, Arduino Shield Adopts MCP2515 and MCP2551. KWD 14
• RS485 CAN HAT for Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero/Zero W/WH/Zero 2W, Long-Distance Communication via RS485/CAN Function Onboard CAN Controller MCP2515 via SPI Interface Transceiver SIT65HVD230DR KWD 7
• 4-Port Stackable USB Hub HAT for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W /2W (with Bluetooth & WiFi) KWD 6
• Waveshare 1.69inch LCD Display Module, Compatible with Raspberry Pi Series Board, 240×280 Resolution, SPI Interface, IPS, 262K Colors KWD 6.500
• PoE Ethernet/USB HUB HAT for Raspberry Pi Zero/Zero W/Zero WH, 3X USB 2.0 Ports, 10M / 100M RJ45 Port, 802.3af-Compliant KWD 10
• GeeekPi Aluminum Heatsink Case for Raspberry Pi 5, Pi 5 Aluminum Alloy Armor Case, Pi 5 Passive Cooling Case for Raspberry Pi 5 4GB/8GB (Raspberry Pi NOT Included) KWD 5.500
• 5PCS Micro SD Card Reader Module Memory Storage Mini TF Card Adapter SPI Interface Breakout Board for Arduino for Raspberry Pi with 40P Dupont Cable KWD 4
• -7% 2 PCS Camera Module,Aideepen OV2640 Camera 160° Wide-angle Lens 2 Megapixel Sensor I2C Support JPEG RGB YUV for ESP32 MCU camera KWD 7 KWD 8
• ESP32 OLED LoRa 32 V3 Case Enclosure Cover Type-C Port, not for Heltec LoRa V2 (Pack of 2) KWD 4
• Smart Robot Car R3 Project Kit Compatible with Arduino IDE, with Tutorial, Bluetooth, Line Tracking, Ultrasonic Sensor KWD 16.500
• ESP32-S3 with 1.28inch Round LCD 240×240 Resolution ESP32 S3 Development Board with IPS Display, 32-bit LX7 Dual-Core Processor, GC9A01 Driver Chip, Supports WiFi/Bluetooth,Type-C Connector KWD 10
• Waveshare Industrial 6-Channel ESP32-S3 WiFi Relay Module, Supports WiFi/Bluetooth / RS485 control, Onboard RS485 / Pico HAT Interfaces, for Expanding RTC/CAN / RS232 / LoRa/Sensor, etc. KWD 15
• waveshare 1.27inch RGB OLED Display Module, 128x96 Pixels 262K Colors OLED Display,Compatible with Raspberry Pi/Arduino/STM32,SSD1351 Driver,SPI Interface KWD 10
• Official Pi PCIe to M.2 HAT for Raspberry Pi 5, HAT + Standard, Supports NVMe Protocol M.2 Solid State Drive 2230/2242 High-Speed Reading/Writing KWD 9
• KEYESTUDIO Micro:bit V2 Robot Starter Kit (without Microbit) for Makecode and Python KWD 12
• HiLetgo ESP32 ESP-32 ESP-32S ESP32S WiFi Bluetooth Wireless Board Module Based ESP-WROOM-32 Dual Core Mode CPU KWD 4.500
• 3-in-1 Set - GNSS Module Receiver with 2 Pack of Prototyping Boards for Flipper Zero Comes with Silicone Protective Case - Supports GPS, BeiDou (BDS), GLONASS and QZSS Systems KWD 8.500
• Electronic Pro Starter Kit - Compatible with Arduino KWD 6
• HiLetgo 3pcs RP2040-Zero RP2040 Microcontroller PICO Development Board Dual-core 264KB Cortex M0+ Processor 2MB Flash (with Unsoldered Pins) KWD 5
• Coral M.2 Accelerator with Dual Edge TPU … KWD 20.500