[Specification] - Air Flow In and Out Hole Size: G1/4; Exhaust Hole size: G1/4
[Advantage] - Multi-channel compressed air flow break control, easy to install and use
[How to Use] - Correspond to the thread specification of the trachea joint and muffler joint, wrap a proper amount of sealing tape and tighten
[Application] - It is mainly used for on-off and shunt control of compressed gas in air compressor system, lift, pneumatic can making machine, train horn, pneumatic drilling machine, robot, etc.
[NOTE] - 1. Ensure that the thread size of the access hole and muffler hole is correct; 2. If using the corresponding G1/4 thread gauge to detect, there is no problem and can be well matched; if using caliper measurement for reference only, the corresponding thread hole diameter is about 11.5mm.
uxcell Compression Tube Fitting, 1/2 NPT Male x Ф3/4" Tube OD with Double Ferrules
KWD 5.500
uxcell Quick Connector L Type 1/4" to 3/8" Push Fit Elbow Connect Fittings for Water Purifier, 35x30mm White 2Pcs
KWD 2.500
uxcell Push To Connect Tube Fitting Male Elbow 12mm Tube OD X 3/8NPT Thread Pneumatic Air Push Fit Lock Fitting 2pcs
KWD 4.500
uxcell 1mm Dia Ceramic Insulation Tube Single Bore Alumina Porcelain High Temperature Insulator Pipe for Heating Element 500 Pcs
KWD 6.500
