How to Use:
1. Install the washer and fixing nut on the button.
2. Align the led light with the switch interface and press it on.
3. Align the switch with the button interface, connect it and then rotate it slightly, the overall installation is complete.
Specification:

Item Type: Push Button
Material: Plastic
Button Head Diameter: Approx. 32mm / 1.3in (there is an error in manual measurement)
Required Mounting Hole: Approx. 25mm / 1in (there is an error in manual measurement)
The maximum depth of the button from the top of the plunger to the bottom of the micro switch: Approx. 65mm / 2.6in
Button Color: 2xRed 2xBlue 2xGreen 2xWhite 2xYellow
Wiring Information:
Package List:
10 x Button
10 x Switch
10 x LED Light
10 x Fixed Nut
10 x Washer
Note:
1. Please allow 12cm error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.