AceCrew Electric Solenoid Valve 1/4 inch NPT 220V, 240V AC Normally Open

AceCrew Industrial grade Electric Solenoid Valve Normally Open
Size 1/4 inch NPT thread ,Voltage AC 220V, 240V
Brass inlet & outlet NPT Thread , easy to install with 2-way 2-position direct lift diaphragm
Normally Open operation for gas and liquid flow control. Valve will close when energized. Suitable for operation systems that requires constant flow of fluid, gas & water in irrigation , gas activated and automated equipment , HVAC systems Flow rate Cv = 0.5 ; Unidirectional (indication on brass body)
Pipe Size : 1/4" NPT Female (18 TPI) . Orifice Diameter : 5/32" (4 mm) Seal/Diaphragm : NBR (Buna-N, Perbunan, and Nitrile rubber)
Current : 0.1 Amp . Wattage : 24 Watt. Operating Pressure Differential : 0-145 psi (0-1 MPa, gravity-feed capable)
Suitable for Low viscosity fluid, Water, air, natural gas, propane, butane, petroleum oil, mineral oils, diesel. Not Suitable for gasoline.
Operating Temperature : 15-125 °F (-10~50 °C).To avoid damaging the coil , this valve is not recommended to be in continuous use for more than 8 hours in a single cycle. Media Temperature : 15-180 °F (-10~80 °C).
Weight of solenoid valve : 14 oz Solenoid Valves are backed with our 1 Year Warranty

Hello,