Search

Search

MKP-32 Trolling Motor Propeller Replacement for Minn Kota Weedless Wedge 2 Prop #1865017#2091160, Weedless Wedge Prop Fits 3-5/8" Motor Diameters, Trolling Motor Replacement Parts

KWD 10.500
Brand
GRONGU
Weight
318 g
– 1 +

Special Features

  • 【Compatibility】Trolling motor propeller compatible with Minn Kota trolling motor prop MKP-32 weedless wedge 2, interchangeable with MKP-37. Trolling motor prop MKP-32 replacement for Minn Kota part number #2091160 #1865017. The MKP-32 trolling motor propeller fit for Minnkota Endura 55, Endura Max 55, Endura MAX 50, 70 lb. Edge, Traxxis 55lb thrust motor.
  • 【Product Details】Motor prop lower unit diameter 3-5/8", prop drive pin length 1.06", motor prop nut thread diameter 5/16"-24, washer inner diameter 0.33". Our trolling motor prop and shear pin nut kits are made from top quality material, high strength, prevent corrosion and rust, wear and impact resistance, sturdy and durable. High precision and hardness ensure long term reliable service.
  • 【High Performance】Replacement for Minnkota MKP-32 propeller features a unique design with swept-back and flared blades that "wedge" weeds away while conserving battery power. The propeller also has curved winglets on the edge of the blades for better and easier weeding.
  • 【Easy Installation】How to install propeller？First disconnect the motor from the battery; Second remove prop nut and washer, turn the old prop to horizontal and pull it straight off; And then align new propeller with the drive pin, install prop washer and prop nut; Last tighten prop nut 1/4 turn past snug.(Be careful, over tightening prop nut can damage prop.)
  • 【After-Sales Service】If you have any questions about the MKP-32 prop and shear pin nut kit, installation and other aspects of the product, you can send us an email at any time, and we will reply within 24 hours.

Description

GRONGU Trolling Motor Propeller MKP-32 Replacement for Minn Kota Weedless Wedge 2 Prop #2091160 #1865017, Interchangeable with MKP-37, Trolling Motor Prop Kit

Product Details
Package Include
1 × Trolling motor prop (lower unit diameter 3-5/8")
1 × Motor prop shear pin (length 1.06")
1 × Motor prop nut (thread diameter 5/16"-24)
1 × Washer (inner diameter 0.33")

Compatibility
Trolling motor propeller compatible with Minn Kota trolling motor prop MKP-32 weedless wedge 2, interchangeable with MKP-37.
Trolling motor prop MKP-32 replacement for Minn Kota part number #2091160 #1865017.

Propeller Replacement:
1. Disconnect the motor from the battery.
2. Hold the propeller and loosen prop nut with pliers or wrench.
3. Remove prop nut and washer. If drive pin is sheared, hold the shaft steady with a screwdriver blade pressed into the slot on end of shaft.
4. Turn the old prop to horizontal (as illutrated) and pull it straight off. If drive pin falls out, push it back in.
5. Align new propeller with the drive pin.
6. Install prop washer and prop nut.
7. Tighten prop nut 1/4 turn past snug. [25 -35 inch pounds ]
Be careful, over tightening prop nut can damage prop.

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}