🦾 【Stiff & Strong & Heat Resistant Nylon Filament】 - Polymaker PolyMide PA6-GF nylon filament 2.85mm is glass fiber reinforced Nylon 6 filament exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion
👉 【Wide Application】 - PolyMide PA6-GF is very strong, durable and features an excellent heat resistance. It can be used in applications requiring torsional, tensile, and impact strength such as bicycle pedals, brackets, jigs, drone frame, prosthetics or handles
🧵 【Tangle Free & Resealable Bag】 - Our glass fiber filled nylon filament 2.85 is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue
⚙️ 【Printing Setting】 - Nozzle: 280-300 ˚C; Bed Temperature: 25-50 ˚C (Do NOT exceed 50 ˚C); Speed: 30mm/s – 60mm/s; Annealing: 80℃ 6h (To ensure a good heat resistance of your printed part it is recommended to anneal your print model); Bed Surface: almost any surface with a thin coat of PVA glue or Magigoo PA
⚠️ 【Note】It is important to have an abrasion resistant nozzle since there is 25% glass fiber inside this Nylon filament. PolyMide PA6-GF is a very stiff filament so it is required to have a good set up to ensure a good feeding (avoiding excessive bending in the filament guide system). It's ultra critical to have your filament enclosed in a dessicant box while printing, and keep your nozzles clean between every 8 prints or so
🛡️ 【RISK FREE & LIFETIME TECHNICAL SUPPORT】 - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
Polymaker Matte PLA Filament 1.75mm Fall, Red Multicolor Gradient 1.75 PLA 3D Printer Filament 1kg - PolyTerra 1.75 PLA Filament Matte Gradient Fall 3D Printing Filament
KWD 12
2.85mm(3mm) PLA Filament 2.85mm, 1kg High Rigidity Black PLA 2.85 - Polymaker PolyLite PLA 3D Printer Filament Black, Print with 2.85mm Openning 3D Printers Only
KWD 9.500
Polymaker Easy to Sand & Paint PLA Filament 1.75mm CosPLA (Version A), 1kg PLA 3D Printer Filament 1.75 - PolyLite 1.75 PLA Filament Easy Sanding for Cosplay, Dimensional Accuracy +/- 0.03mm
KWD 10.500
Polymaker Matte PLA Filament 1.75mm Bundle 2x1kg, Matte Black PLA Filament Bundle - PolyTerra PLA 3D Printer Filament Bundle 2 Rolls PLA Filament Pack
KWD 16.500
