Specification:
100% brand new and high quality clutch drive belt.
Color: black.
Width: 1.26 inch / 32mm.
Thickness: 0.59 inch / 15mm.
Length: 37 inch / 940mm.
Package include: 1 x clutch drive belt.

Replace part numbers:
1XD-17641-00-00 2MB-E7641-00-00 3B4-17641-00-00 4WV-17641-00-00
4WV-17641-01-00 5KM-17641-00-00 5KM-17641-01-00 B16-E7641-00-00 28P-17641-00-00
0823-391 0823-496 29G3596 30G3596 34C3596 34G3596 UA438 UA478 UHQ438 UXP438 UXP478

Compatible with Yamaha:
Grizzly 550 YFM550 2009-2014
Grizzly 600 1998-2000
Grizzly 600 YFM600F 1998-2001
Grizzly 660 YFM660/YFM660F 2002-2008
Grizzly 700 2007-2017
Grizzly 700 YFM700 2007-2018
Kodiak 700/700K YFM700K 2016-2017
Rhino YXR66F 2004-2007
Rhino 660 YXR660/YXR660FA 2004-2007
Viking 700 YXC700 2016-2021
Viking 700 YXM700DH 2014-2018
Viking 700 YXM700DHH 2014-2020
Viking 700 YXM700P 2014-2021
Viking 700 YXM700PHH 2014-2021

Compatible with the following models:
Arctic Cat Wildcat 1000 2013-2014
Arctic Cat Wildcat 4 1000 2013-2018
Arctic Cat Wildcat X 1000 2013-2019
Arctic Cat Wildcat 4X 1000 2014-2018
Kawasaki Teryx/Teryx4 800 2016-2019
Kymco UXV 700i 2014-2015
Wolverine R-SPEC YXE70 4X4 FI 2016-2018

How to Select the correct belt?
1. Determine the series type.
2. Measure the ”Outer Diameter” (O.D.) of the driven pulley on the jackshaft.
3. Measure the ”Center Distance” (C.D.), which is the exact distance between the center of the engine crankshaft and the center of the jackshaft, must be precise.
4. Use the two measurements, the driven pulley outer diameter and center distance measurement to determine the correct belt part number from the relevant chart below.