The Starkey Bed Lighting Kit is compatible with your 2015+ F-150! This system gives you the quality that is normally only found from the factory, while providing an easy to install system. Our kit is completely Plug-N-Play for some trucks – see below for details.

Fitment:
2015-2020 Ford F-150

What's Included:
2 – LED Lamps
Wiring Extensions for lamps
Plug-n-Play C431 Y-Adapter Harness
Detailed installation manual / video
5 Year Limited Warranty

Installation:
Installation difficulty = Very Easy
Installation time = 15 minutes
Tools required = Flathead screw driver

*Your truck must be pre-wired for the Y-Adapter to provide power to your Bed Lighting. All trucks equipped with the Trailer Assist Lamp, as well as some trucks with a factory-installed tow package are pre-wired. To determine if your truck is pre-wired, check the C431 inline connector shown in our instruction manual and installation video. On at least one of the plugs, the following wires should be present:
2015-2017 = Pin #6 (Black with Yellow Stripe) and Pin #7 (Purple) – Please note, there is a Brown wire with Purple stripe that looks similar.
2018-2020 = Pin #6 (Black with Yellow Stripe) and Pin #7 (White with Green Stripe) – Please note, there are TWO White with Green wires. You must have BOTH.

If they are not, you will also need Starkey #4572 Power Extension Wiring