Search

Search

GELRHONR OBD Power Cable with Switch Button, Right Angle Micro USB to OBD2 Power Cable for Dash Camera 24 Hours Surveillance/Acc Mode 12-24V to 5V 23A, for Dashcam, GPS or Radar-3.5M/11.5Ft

KWD 5
KWD 6
Brand
GELRHONR
Category
Car Electronics
Weight
95 g
– 1 +

Special Features

  • ✪ Application: OBD Power Cable for Dash Camera, is suitable for the ODB port and dashcam. It has two modes: One click to switch: Work on/off with the and 24hour recording. Note: This dash cam power cable OBD2 DOES NOT work with Electric Vehicle.
  • ✪ Two working mode: 2 modes are toggles by a switch on the OBD port. Mode"—": Parking monitoring mode,Surveillance mode provides 24 hr power w/ low voltage protection that shuts down the device to keep it from killing the battery. Mode"O": ACC mode , at this mode your dash camera will turn On/Off when your turn On/Off.
  • ✪ Low voltage protection: OBD2 dash cam power cable has a built-in MCU intelligent control chip, which can detect the battery power of the in real time. When the power drops to the low-voltage(11.6V) protection value of the OBD cable, the OBD line automatically enters the low-voltage protection and turns off the output!
  • ✪ Micro USB Plug 90°Angled "L" design: perfect for space saving and connection in narrow space. And can make for better cable management in some situations. So if your camera is quite big or the port is on the sides this will perfect for it.
  • ✪ Plug and play, easy to install: Plug and play, do not destroy the original circuit. It simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics. Cable is long enough to reach front or rear of the

Description

GELRHONR OBD2 OBD Power Cable for Dash Camera ,OBD2 Diagnostic Extension Adapter to Micro USB Cable 24 Hours Surveillance/Acc Mode with Switch Button, fits for most dash cameras, GPS, radar, and dash cams.
Don't worry, if you forgetting to start/stop your dash cam, now it takes of itself.
Power cable for dash cam was installed completely hidden.
It simply plugs into your OBD plug and draws power for your device. Also doesnt interfere with any vehicle diagnostics.
Note: This cable does not work with Electric Vehicle
Only for Charging OBD Power Connector: Obtaining power from OBD interface only, no interference in other OBD data communication.
OBD Power Cable for Dash Cam Micro USB Have Two Work Modes:
① MODE“—”: will active your Dash Cam parking mode for 24h Surveillance and power will cut off if voltage drops below 11.6V;
Input:DC11.6V-36V Output:DC5V/3A
② Mode“O”: The obd power cable type c will power off after 5 minutes when your ACC is off.
Input:DC12.8V-36V Output:DC5V/3A
L shaped Micro USB plug: it's perfect for the camera is quite big or the port is on the sides, and not block your view a little more.
Length: 3.5M/11.5Ft
The cable is long enough to be routed across under the dash, up the A pillar and to the center of the window.
Packing list:
1 * OBD to Micro USB OBDII Adapter Hardwire Charger Cable

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}