Specification:
Item Type: Current Detection Sensor Module
Material: PCB
Working Current: Standby: 12mA, Working: 56mA
Working Voltage: DC12V
Digital Display Life: more than 50,000 hours
Relay Life: less than 100,000 times
Digital Tube: 3 in 1
Working Temperature: -20℃~75℃
Measuring Range: 0-25mA
Detection : 4-20ma
Several Modes Can be Set as Follows: (Long press "-" for 3s to enter the adjustment mode)
P-1: Suction exceeds the set value, but is disconnected below the set value; the measured value exceeds the lower limit value and the relay suctions, and disconnects below the lower limit value.
P-2: Disconnect when the value exceeds the set value, but is lower than the suction; when the measured value exceeds the lower limit, the relay is disconnected, and the suction is lower than the lower limit.
P-3: Suction in the interval and disconnected outside the interval; the measured value is between the upper limit and the lower limit and the relay sucks, otherwise it is disconnected
Setting Instructions (for The Convenience Of Description, Use K1 For The setting key, K2 for the + key, and K3 for the-key):
Key Description: "K1 shift/adjust; K2+; K3-/mode selection
Press the K1 key, the first digit flashes, adjust the lower limit of hundreds, press K2, K3 to adjust 0~1 change
Press the K1 button, the second digit will flash, adjust the tens digit of the lower limit, press K2, K3 to adjust 0-9 changes
Press K1 key, the third lower third digit flashes, adjust the lower limit one digit, press K2, K3 to adjust 0-9 change
Press the K1 key, the 4th, lower, and fourth digits will flash, adjust the upper limit of hundreds, press K2, K3 to adjust 0~1 changes

Package List:
1 x Current Detection Sensor Module