Outboard Trim/Tilt Pin Wrench MT0006-32mmx 4/4.5mm

With Pins:
3pcs S-4mm; 3 pcs S-4.5mm
Replace Factory Tool:YB-06175-1A, YB-06548

Outboard Trim/Tilt Pin Wrench MT0009-35mm x 6mm

With Pins:
3pcs L-6mm

Why you need the trim tilt pin wrench
Usually, you will put a little drift into one of those holes in the trim and tilt caps with a hammer. Than,you destroy these cap ,you will thrown them away,which cost a about hundred bucks. So, you really need the pin wrench to help you remove the trim end cap with ease

High Quality Material
Made of high hardened 4140 impact grade steel,with silver oxide coating which is rust-resistance and durable to use..

115225FS Fast Strike Power Trim Tilt Seal Replacement Kit

Replace Models:
60X-43800-00-4D, 63P-43800-00-4D, 63P-43800-01-4D, 63P-43800-02-4D,
63P-43800-02-8D, 63P-43800-03-00, 63P-43800-03-00, 63P-43800-06-00,
63P-43800-07-00, 64E-43800-05-00, 64E-4384J-00-00, 67H-43800-00-4D,
68F-43800-00-4D, 68F-43800-01-4D, 68V-43800-03-4D, 68V-43800-04-00 & More.

Material
Made of high quality and environmental Rubber, No leaking and They can resist everything from ethanal to UV's to Oxidation from salt water environments.

Performance
# In a Freshwater application on a bass boat you will see the bolts have stretched and lost their torque from the hydraulic pressure in between the valve body and manifold.
# In a salt water application salt and corrosion builds between the flange and wedges it apart as well as oxidizing the O-ring grooves and forcing them to fail and fall out of place.