Specifications: Mounting Hole Spacing: 102mm (4") (measured center to center); Overall Length of Mounts: 116mm (4.5") (measured end to end); Coil Dimensions: 79mm long x 47mm wide (3" x 1.8"); High Tension Wire Length: 21" (spark plug wire); Low Tension Wire Length: 10" (Plastic Plug); Primary Resistance: 1.0 ohms +/- 10%; Secondary Resistance: 14.3k ohms +/- 10%
Accessory Description:This accessory can be used as a direct replacement for damaged old accessories. If you have any questions during use, please contact us to solve it for you.
Tips Before Buying: Please confirm whether it is applicable to your model according to the product information before placing an order. If you are unsure, you can always contact us to advise you.
Description
Remark:
Please carefully refer to the following models and OEM Part numbers to determine whether they are compatible with your vehicle.
Package Contents:
Ignition Coil *1
Spark Plug*2
Cap*2
Applies to the following vehicles:
Honda CB250N Super Dream - 1979
Honda CB250NA Super Dream - 1980
Honda CB250NB Super Dream - 1981
Honda CB400A Hawk Hondamatic - 1978
Honda CB400N Super Dream - 1979
Honda CB400NA Super Dream - 1980
Honda CB400NB Super Dream - 1981
Honda CB400NC Super Dream - 1982
Honda CB400T Hawk - 1980-1981
Honda CB400T Hawk I - 1978-1979
Honda CB400T Hawk II - 1978-1979
Honda CM400A Hondamatic - 1979-1981
Honda CM400C Custom - 1981
Honda CM400E - 1980-1981
Honda CM400T - 1979-1981
Honda CB450T Hawk - 1982
Honda CB450SC Nighthawk - 1982-1985
Honda CM450A Hondamatic - 1982-1983
Honda CM450C Custom - 1982
Honda CM450E - 1982-1983