The skid plate pieces are full length repair pieces that completely repair the areas in front of and behind the skid plates.
These pieces gets attached to the frame and the transfer case and transmission gets bolted to them. Hardware is included.
Each piece measures approximately 43 1/2" end to end.
Constructed of 10 gauge rolled high carbon steel which is thicker than your existing frame.
NOTE: These are weld on pieces. Moderate welding skills required. You will need to cut out the lower 2/3 of your frame and sandwich the repair piece over the remaining upper 1/3. Screw in provided bolts through the repair piece into the frame, then weld around the perimeter of the piece. This item will be delivered bare steel.