Specification:

Material: PVC material, carbon fiber texture
Color:Black, Red, Gold, Silver
Size: Length: 2.5m /8ft ,
Width: 3cm/ 1.2”, or 5cm/ 2”, depends on your choice.
Installation location: car door, door sill, bumper, Corners, rear etc.
Car Bumper suitable: Universal for most cars, trucks, SUV,jeep

Steps:

1.Use alcohol or clean water to clean the dust or oil of the position. After the surface is dry, stick it.
2.Heat the backing adhesive tape, or use extra glue tape
3.When pasting, do not touch the adhesive rubber surface with your hands. The adhesive tape will be greatly weakened due to the oil stain or fingerprint on the hand.
4.After sticking, press by hand for 1 minute to let the air out.(The ideal temperature for pasting is 15-38 ° C, not lower than 10 ° C)

Note:

1.Universal model product means it can pretty much fit any vehicles, but some require inevitably measurement, drilling or modification!
3. Please allow 1-2cm (0.4-0.79 in) difference due to manual measurement.

PS: If you still worried about that the direct paste is not strong enough, you can use a lighter or a hair dryer to heat the rubber surface to make it stronger. Or use another adhesive tape to glue the bumper cover.

Package include:

1x Door Sill Protectors