Specification:
Chip: L298N
Logic Voltage: 5V
Logic Current: 0mA-36mA
Storage Temperature: -20℃ to+135℃
Operating Mode: H-bridge driver (dual)
Drive Voltage: 5V-35V
Drive Current: 2A (MAX single bridge)
Maximum Power: 25W
Dimensions: 43x43x27mm
Note:
1. General Application: When your driver is 7V-12V, you can enable the on-board 5V logic supply.
2. When using the on-board 5V power supply, the + 5V power supply in the interface does not input voltage, but it can draw 5V voltage for external use.
3. Unconventional application of high-voltage drive: When the driving voltage is higher than 12V, less than or equal to 24V, for example, to drive a motor with rated voltage of 18V, the jumper cap with 5V output enabled on-board voltage must be pulled out and then outside the 5V output port Connect 5V voltage to L298N internal logic voltage supply.
Package Included:
12* L298N Motor Driver Controller Board Module
1* Jumper Wire Set