Search

Search

2pcs BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit

KWD 5.500
Brand
Azuocn
Weight
141 g
– 1 +

Special Features

  • 5V isolate with MCU, and effectively protect MCU; 5V power indicator on board.
  • Voltage indication of motor driver output end; can solder heat sink.
  • Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2); isolation chip 5 V power supply (can share with MCU 5 V).
  • Able to reverse the motor forward, two PWM input frequency up to 25kHZ; two heat flow passing through an error signal output.
  • Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply; the supply voltage 5.5V to 27V.

Description

This driver uses chips BTS7960B composed of high-power drive full H-bridge driver module with thermal over-current protection
Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver
Specification:
High-current 43ATwo heat flow passing through an error signal outputSupply voltage: 5.5V to 27V5V power indicator on boardJust need four lines from MCU to driver module (GND. 5V. PWM1. PWM2)Isolation chip 5 V power supply (can share with MCU 5V), can also use the on-board 5V supplycan solder heat sinkControl method: PWM or levelDuty cycle: 0-100%PIN Definition:
RPWM: Right Turn PWM
LPWM: Left Turn PWM
R_EN: Right Turn Enable (High Active)
L_EN: Left Turn Enable (High Active)
R_IS: Right Turn Current Warning (May Leave Floating)
L_IS: Left Turn Current Warning (May Leave Floating)
VCC: (5V)
GND:signal common low end
Package Included:
2 * BTS7960B H-bridge 43A High-Power Motor Driver Module

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}