AC Heater Blower Motor for 1992-1996 Eagle Summit 1992-2000 Mitsubishi Montero,87103-42020/700039

【Fitment】The Heater Blower Motor Replacement for 1992-1996 Eagle Summit,1990-1994 Mazda 323,1992-1995 Mazda MX-3,1990-2005 Mazda Miata,1990-1994 Mazda Protege,1992-1995 Mitsubishi Expo,1992-1994 Mitsubishi Expo LRV,1992-2000 Mitsubishi Montero,1991-1995 MR2,1992-1998 Paseo,1989-1995 Pickup,1996-2000 RAV4,1993-1998 T100,1991-1998 Tercel.
【Replace Part Number】87103-42020, 700039, NA01-61-B10, MB657229.
【Advantage Of The Motor】Wind power strong and No noise. Adopt new technology and excellent production equipment to make products more environmentally friendly and energy-saving.
【1 Year Warranty】Every product must take inspected and tested multiple times before the shipment, Please feel free to contact us if you have any question regarding our this blower motor.
【Warm Note】Please check the description or use the year/make/submodel/bodytype drop down bar and interchangeable part numbers to confirm the compatibility before purchase our this Blower Motor.

HVAC Blower Motor Fits For the Following Vehicles:

For 1992-1996 Eagle Summit

For 1990-1994 Mazda 323

For 1992-1995 Mazda MX-3

For 1990-2005 Mazda Miata

For 1990-1994 Mazda Protege

For 1992-1995 Mitsubishi Expo

For 1992-1994 Mitsubishi Expo LRV

For 1992-2000 Mitsubishi Montero

For 1991-1995 MR2

For 1992-1998 Paseo

For 1989-1995 Pickup

For 1996-2000 RAV4

For 1993-1998 T100

For 1991-1998 Tercel

Replaces Part Numbers:87103-42020, 700039, NA01-61-B10, MB657229.

BENEFIT OF THE BLOWER MOTER

1.Provides a comfortable ride for passengers.

2.Reduces the fatigue of the driver.

3.Improves the safety of driving, air purification.

HOW TO INSTALL A NEW BLOWER MOTOR:

1.Remove the screws under the passenger side dashboard of the vehicle.

2.Find the HVAC blower motor.

3.Disconnect the blower motor electrical connector.

4.Remove the old blower motor.

5.Compare the new blower motor to the old one to verify that you have the correct part.

6.Install the new blower motor into the box and tighten the screws.

7.Connect the blower motor electrical connector.

8.After the installation is complete, turn on the air conditioner and check if it is running normally.

Blower Maintenance:

Clean the dust inside the motor regularly, especially the dust,dirt and other impurities on the impeller to prevent rust and imbalance.

Tips

1.When you replace the blower motor, it is recommended to replace the new blower motor resistor.

2.Please use the year/make/model drop down bar confirm the compatibility before purchasing.

Package including:1 x Blower Motor Fan

Hello,