APPLICATION RANGE:
The push-to-connect fittings are used for quick connection and repair of polyurethane or nylon tubing to change the direction of water flow between pipes. Widely used for air compression systems, vacuum systems, and pneumatic systems.

DURABLE DESIGN:
1. The male thread socket connector is suitable for sliding connection of most polyethylene and nylon water pipes, including garden, irrigation, sewer, balcony, swimming pool and other unthreaded pipe fittings, which reduces friction to enhance water flow speed.
2. Made of thick and durable brass, which has abrasion resistance, high-pressure resistance, compressive and corrosion resistant, and is lightweight.
3. Push-to-connect tube connection on one end and female PT threads on the other end design. Elliptical release ring help to connect tube easily manually.

PACKAGE INCLUDE:
2 Pack of 10mm to 1/8 PT female connectors, which total size is 31mm x 17mm/ 1.22 x 0.67 inch (L*W); Female thread size is 1/8 PT; Fit tube outer diameter is 10 mm/ 0.39 inch; Operating pressure is 0 to 9MPa; Operating temperature is 0 to 60 Degree Celsius.

NEED ATTENTION:
Please note the proper temperature and pressure range to use and cut the pipe flat, with no slope. Insert the tube into the bottom of the fitting and try to pull the tube, if it doesn't come out it's a success. When loosening the tube, first confirm that there is no pressure in the tube, and then press the end cap evenly to the bottom.