Search

Search

720A RK1-720A Pressure Vacuum Breaker Repair Kit for 1/2" 3/4" and 1" - Easy to Replace, Fixed Sprinkler System Backflow Issues.

KWD 5.500
Brand
DEHOMKUS
Weight
91 g
– 1 +

Special Features

  • ⭐ Compatible with 1/2-inch, 3/4-inch, and 1-inch 720A series pressure vacuum breakers, this repair kit is made of stainless steel, rubber, and plastic for wear resistance and long service life.
  • ⭐ Designed for installation on potable water lines, the 720A series pressure vacuum breaker assembly protects against back-siphonage of contaminated water into the potable water supply.
  • ⭐ The kit includes plastic washer, O-ring, spring, poppet assembly, and spider assembly, making it suitable for repairing most freeze-damaged 720A PVB's, unless the ball valves or body itself is cracked.
  • ⭐ Suitable for 720A pressure vacuum circuit breakers, also known as a backflow preventer, this repair kit provides a reliable solution for maintenance and repair needs.
  • ⭐ Friendly Note: We pay great attention to customer experience, if you find a product problem after purchase, please contact customer service in a timely manner, we will provide you with a solution, thank you!

Description

Installation steps:
1. Shut power off to the valve
2. Remove the 3 screws from the canopy and set aside
3. Remove the canopy and unscrew the brass bonnet
4. Remove the Disc & Poppet Assembly and washer & old O-Ring
5. Remove the Spring & Spider Assembly
6. Use a cloth to wick up any water and inspect the valve for any damage
7. Install the Spider Valve, Spring, O-Ring, Dis & Poppet Assembly, plastic washer
8. Thread the bonnet and make sure the shaft of the disc & poppet assembly is in the center of the bonnet
9. Hand tighten the bonnet
10. Install the Canopy and the 3 screws. Tighten all 3 once all are in place

Related Items

{"error":"Error","cart_limit":"You have too many items in your cart.","prod_limit":"You cannot add any more of this item"}