✪ 2 Pin DuPont 2.54mm jumper wire splitter used add in a remote mounted power/ reset button. Used to connect newer mother board to front panel power and lights on old PC case. Or compatible with other external desktop computer chassis switches and dual USB port power reset buttons.
✪ Product material: DuPont 2.54mm jumper wire. It is made of tin-plated copper material, good electrical conductivity. The pins and sockets grip well. Greatly improve the DIY ability.
✪ Product use: Suitable for computer group double boot, double restart line,Electronic projects,PC motherboard and laboratory DIY operation.
✪ 2.54mm Pitch:2.54mm Pitch Male connector at end of each wires, will easy to support different connection: bread board hole, pin header, female header or other connectors with different pins.
✪ Wire Gauge:length 115mm/4.5inch,26AWG, securely connected to the pins.These jump wires are single and independent for easy use.
Description
GELRHONR 2.54mm Dupont Wire Female to dual male 1 to 2 header Splitter cable
Allows you to add external power buttons with LEDs to two of your computers.
Combine this extensions with Desktop Computer Case Motherboard Power Supply Reset HDD Button Switch, and you can have the on/off switch right at your level.
This was perfect for you needs to transplant a new motherboard into an old server case with a proprietary front panel connector.
It made up for the case design not offering long enough leads from front panel controls for all motherboard layouts.
This was just what you needed when you wanted to route your front panel i/o to make the system look cleaner.
Durability:Securely connected to the pins, quick DIY. In the terminals have not damaged it can be reused.
Easy to use: Simple extensions, just plug front panel wires into the one's you need.
Product size: Total length 115mm/4.5 inche. 26AWG,Tinned copper.
Package:
8*2 Pins Female to Dual Male Jumper
2x PC Power SW Jumper, 2x PC Reset SW Jumper , 2x PC Power Light-emitting Diode Jumper , 2x PC HDD Light-emitting Diode Jumper.