PWM 4Pin and 5V 3Pin ARGB Hub, 2-in-1 Sync Hub with SATA Power Port, CPU Cooling Fan RGB Lighting Effect Controll Cable Splitter for Extended Motherboard Interface
ARGB and PWM 2-in-1 Hub: Up to 10 sets of ARGB (5V 3pin) and PWM (12V 4pin) plugs to meet your need to connect more devices. Supports 10 simultaneous fan syncs, with one setting for all fan speeds and colours.
Powered by SATA, this CPU cooling hub maintains stable and safe output even under full load.
Effective cable management saves space and tidier chassis interior. The adhesive on the back can be used to fix the hub inside the chassis, tool-free installation, and not easy to fall off.
The PWM ARGB Hub comes with 2 cables. (20 inches in length). The red connector on the hub is a professional connector for the CPU fan.
The ARGB hub is 5V 3-pin. Do not connect the 12V RGB components as this may cause damage.
PrimoChill Hardline/Rigid Watercooling Tubing Finishing Bit (RFB) - Ream/Deburr/Trim - 1/2in. ID x 5/8 in. OD
KWD 16.500
EZDIY-FAB Fan hub X
KWD 7.500
AISIBO DC Cooling Fan Brushless Fan Computer Fan Case 5 inch Ball Bearing Exhaust Fan 12025 120mmx120mm x25mm (DC12V 0.33A)
KWD 4
GDSTIME Dupont Connector 30mm x 30mm x 10mm 3010 5V DC Brushless Cooling Fan
KWD 4
