Rembam Information:
Rembam has own factory and many experienced workers.Every lamp will be take strict quality test before leaving factory.So you don't need to doubt the quality.

Specifications:
Part number:ELP-LP42 V13H010L42
Application:Business/Education/Home/School
Compatible:for Epson PowerLite 83+ Epson EMP-X56 Epson EMP-280
Epson EMP-400 Epson EMP-400W Epson EMP-822
Epson EMP-822H Epson EMP-83 Epson EMP-83C
Epson EMP-83H Epson EMP-400WE Epson EMP-822P
Epson EMP-83E Epson EMP-410W Epson EB-410W
Epson EMP-83HE Epson EB-410WE Epson EMP-410WE Epson EX90

Package:
1 bulb with housing
1 Instructions sheet

Installation:
1.Turn off the projector and unplug the power cord.
2.Let the projector cool for at least an hour. The lamp is extremely hot immediately after use.
3.Loosen the lamp cover screw. Then slide the lamp cover off.
4.Loosen the two screws holding the lamp in place.
5.Hold the lamp as shown and pull it straight out.
6.Gently insert the new lamp. Then tighten its screws.
7.Replace the lamp cover, then tighten its screw.

Notes:
1.To avoid burns,allow the projector to cool for at least 60 minutes before replacing the lamp.
2.We provide excellent refund service with no any contidition with 12 hours feedback.If you have any questions,please contact us.We will try our best to sole your problem as soon as possible.